Dec 21, 2008, 01:18 AM // 01:18
|
#1
|
Academy Page
|
lag issues purely due to Wireless-G
So GW has always run smoothly for me, with an 8800 Gfx card, 3 gigs of ram, and a high speed DSL modem connection, lag was very rare for me. Now unfortunately, I've moved my comp to my basement so it now has to run on a Wireless-G Network adapter, so basically my desktop is picking up wifi.
Now in the heat of battle in both pvp and pve, one of 2 things happen (or both)
1. My ping goes red or orange
2. My FPS drops from 66~70 to 20~30
I've shut down all other interfaces that potentialy take up speed, and even reduced GW to its lowest graphical settings for maximum performance.....still no go.
Suggestions?
Edit~ both router and wireless-G adapter are linksys brand
|
|
|
Dec 21, 2008, 02:34 AM // 02:34
|
#2
|
EXCESSIVE FLUTTERCUSSING
Join Date: Mar 2007
Guild: SMS (lolgw2placeholder)
Profession: Me/
|
There's not much you can do. It's just the nature of wireless internet. The only way to get your connection back to where it was is to connect up to a wire.
Other than that, get as close to the access point as possible. You could also fabricate a higher gain antenna, most of which are easy to find and build from plans on the internet. That might help some.
__________________
All seems lost now, but still we must fight on.
|
|
|
Dec 21, 2008, 10:19 AM // 10:19
|
#3
|
Ascalonian Squire
Join Date: Feb 2008
Guild: The legend of peace
Profession: R/
|
I had something similar with lag spikes (dont know about the fps). Took a long time for me to find a solution. It was something similar like this:
http://www.guildwarsguru.com/forum/s...php?t=10343571
Hope this helps
|
|
|
Dec 21, 2008, 09:41 PM // 21:41
|
#4
|
rattus rattus
Join Date: Jan 2006
Location: London, UK GMT±0 ±1hr DST
Guild: [GURU]GW [wiki]GW2
Profession: R/
|
Ever thought of a cantenna?
http://en.wikipedia.org/wiki/Cantenna
...not as stupid as it sounds
__________________
Si non confectus, non reficiat
|
|
|
Dec 21, 2008, 10:33 PM // 22:33
|
#5
|
Academy Page
|
Quote:
Originally Posted by sniper8999
|
Everything happened according to what that guide said, so i was very pleased, my command line did indeed show a ridiculous jump of like 1, 1, 2686!, 1, 1, and the procedure that followed fixed it, but it didn't change the lag
At, the cantenna, lolwut? Wish it told me how to build the thing
|
|
|
Dec 22, 2008, 02:56 AM // 02:56
|
#6
|
Furnace Stoker
Join Date: Jan 2007
Location: Ohio
Guild: I Will Never Join Your Guild (NTY)
Profession: R/
|
the closer and clearer the path to your router the better you will be... a cantenna isn't all that bad, I tried something similar once, and it did improve my signal strength, which is always a good thing with wifi.
|
|
|
Dec 22, 2008, 04:44 AM // 04:44
|
#7
|
Forge Runner
Join Date: Dec 2005
Location: Oz
Guild: Angel Sharks
Profession: Me/N
|
I had this problem some time ago. My laptop at the time was situated right next to the router and for some reason one day lag just set it like crazy and never really cleared.
I personally put it down to a damaged wireless in my laptop. Since I was right next to the router, I just plugged a lan line in. I didn't have it plugged in initially because my sole functioning network cable is long and messy.
My new laptop is behaving much better. Even in my lounge I can access the network (in my old house I had to be in the same room, something in the walls I think).
|
|
|
Dec 22, 2008, 04:50 AM // 04:50
|
#8
|
Academy Page
|
I suppose this means i should start drilling holes, and get a super long Ethernet going on both ends. I'll have to drill a hole to get the cable down a floor, and then through a room.
*sigh*
~thnx for the input guys
|
|
|
Dec 22, 2008, 05:52 AM // 05:52
|
#9
|
Forge Runner
Join Date: Mar 2006
Profession: N/
|
Quote:
Originally Posted by cresent sky
At, the cantenna, lolwut? Wish it told me how to build the thing
|
Quote:
Originally Posted by wiki
External links
Youtube video on How To Build A low loss Cantenna
How To Build A Tin Can Waveguide Antenna
Wlan antenna Waveguide type
Antenna in a Pringles can
Do-It-Yourself Wireless Antenna Update
Cantenna Calculator
Designs for 2.1GHz, 2.45GHz, 3.5GHz, and 5.8GHz cantennas
Extending Your Wireless Range with a Cantenna
|
did u even read the article?...
aside from building ur own device
there r products u can buy to increase the signal strength
and it doesnt hurt to research either
http://www.google.com/search?client=...utf-8&oe=utf-8
|
|
|
Dec 22, 2008, 12:47 PM // 12:47
|
#10
|
Forge Runner
Join Date: Jun 2006
Guild: Hard Mode Legion [HML]
Profession: N/
|
Crescent,
There could be two problems:
- First is the problem from my posting (you refer to in #5). It should show consistent low ping with a spike at set intervals over a longer period. You might also want to check if there are more recent drivers available for your network card.
Supposing you use Vista, perhaps you can tell me what message you get from the commands 'netsh wlan ....' command?
It might help to indicate what goes wrong.
- Second could be signal strenght or a lot of 'noice' in the air.
Wifi needs enough signal power to make a relyable connection and also not too much interference from other devices. I had to move my wireless router around a little to get a decent signal.
Noice is caused by other electical devices. For example, while moving my router the noice also changed. That's because my wireless (not cell-)phone is also near that place.
Other electical devices might also cause radiation in the air that could trouble your connection.
Since you play in the basement and I suppose the router is located in another room I surgest checking signal strenght.
|
|
|
Dec 23, 2008, 12:21 AM // 00:21
|
#11
|
rattus rattus
Join Date: Jan 2006
Location: London, UK GMT±0 ±1hr DST
Guild: [GURU]GW [wiki]GW2
Profession: R/
|
For the record:
I gave up on wireless internet over a year ago. I live in a small flat (apartment, if you must) - and the signal was totally poo even in adjacent rooms.
My setup now - four PCs in three rooms, two Xbox 360s, a PS3 and a Wii - all connected with cat5e via a 4-port modem/router and an 8-port switch.
My home looks like a spaghetti house has asploded :/
__________________
Si non confectus, non reficiat
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 12:19 AM // 00:19.
|